Adhesive between tiles?

[spoony]

No way is that 80-90 % coverage.
To prove it tell him to take a tile off

Originally admitted it was spot fixed and when I shared TTA link,then said it was not.

I've said exactly that - let's take a couple of tiles off together and see whether we have blobs or trowel marks.

Many thanks for the advice here. If he is not willing to redo then I will be looking for a new tiler.

On a separate Q, what tile brands would the experts here recommend? I want whatever goes up to last and I see many of you won't work (understandably) with poor products.

 

[GoneGuy]

Bct ( British ceramic tile ) sold in most diy stores are of bad quality, I try and avoid fitting these.

 

[Flintstone]

Your best off finding a mid range porcelain tile from your local tile shop, rather than diy centre, in my opinion. I have refused a British ceramic tile job only last week, and told them to buy a better tile, plenty of choice out there without breaking the bank

 

[spoony]

Your best off finding a mid range porcelain tile from your local tile shop, rather than diy centre, in my opinion. I have refused a British ceramic tile job only last week, and told them to buy a better tile, plenty of choice out there without breaking the bank

Thanks. Any particular brands to keep an eye out for? Eg I've seen a lot of Troy in B&Q. Then I've seen Porcelanosa and Fired Earth. I don't mind paying for good quality , it's just tricky working out what is quality and what is just paying for the name

 

[Dumbo]

Avoid diy stores just go to a proper tile shop something like ctd

 

[spoony]

Avoid diy stores just go to a proper tile shop something like ctd

Thanks, will check out CTD

 

[Dumbo]

Thanks, will check out CTD

Don't know where you are in southeast but there is also hants tile warehouse in Aldershot,uckfield,London and brighton who are very good

 

[spoony]

Don't know where you are in southeast but there is also hants tile warehouse in Aldershot,uckfield,London and brighton who are very good

Cheers. I'm Kent

 

[spoony]

Tiler swears they are not dot and dabbed.....picture suggests otherwise!

I've now pulled the whole lot down and removed tiler after he refused to redo.

I just want to say a big thanks to @Chris_32 , @Del W and @Simon Dale , all of whom have taken the time to talk to me and even visit to inspect all the work.

 

[Del W]

Oh dear, sorry to see that. Thanks for the mention.

 

[spoony]

Now I am back to the plywood (which tiler says is not plumb) what is the best way to get a flat, straight wall? Would you ever use adhesive to stick cement board to the plywood (allowing you to make the wall plumb)?

...Or is that silly and is the answer to rip back to the studwork and correct from there?