Adhesive failure

[Deleted member 15]

Hi Looking advice/opinion on what the problem is here, or if anyone else has came across similar . Tile adhesive is crumbling, All I know is that its a new build, sand cement screed, im told the tile adhesive used was Evo stick Rapid flexible

Have a look at video Password Protected Video - Dailymotion - https://www.dailymotion.com/video/x80odj9 password is tiling

Thanks

 

[CJ]

Adhesive out of date?

over watered?

Not used evostick myself, but that’s generally from Wickes and the like

 

[bsc ceramics]

Do you have under floor heating?

 

[Deleted member 15]

Do you have under floor heating?

No, there's no underfloor heating, Its not the whole floor just a certain area

 

[Paul d tiler]

Looks like the water in the adhesive has been drawn by the screed before it's had time to cuire , maybe it wasn't primed prior to tiling

 

[Deleted member 15]

Looks like the water in the adhesive has been drawn by the screed before it's had time to cuire , maybe it wasn't primed prior to tiling

Not sure if the floor was primed, but surly that would affect the whole floor

 

[Stonefab]

Hi I have the exact same problem, tiled with bostik rapid set flexible, (bostik has taken over evo stik here in Ireland) floor was primed, I am a my witts end being given the runabout by Bostik, after 9 months the adhesive can be crushed easily with your hand, 20 years experience and have never seen this before, what have you done to resolve this