J
jwatson
i am @ blackpool college.(wall and floor tiling level 2)
our college is having a competition next week for the 3 candidates to be sent to regenal competition(skill build). i got through the first round joint top, and the competion is wittled down to 6 from 34.
all the cuts we do have to be done by hand; and some are very small slithers that tend to chip, i am hoping someone will part with some wisdom on technics of cutting ceramics (very small triangular slithers) by hand. the technic i am using @ moment is to score on rubi, nip a bit out of each side then use my snapping plyers, this works a little better but any advise really welcome
our college is having a competition next week for the 3 candidates to be sent to regenal competition(skill build). i got through the first round joint top, and the competion is wittled down to 6 from 34.
all the cuts we do have to be done by hand; and some are very small slithers that tend to chip, i am hoping someone will part with some wisdom on technics of cutting ceramics (very small triangular slithers) by hand. the technic i am using @ moment is to score on rubi, nip a bit out of each side then use my snapping plyers, this works a little better but any advise really welcome