Backer board type shower tray

[hillhead]

Hi all,
i have a job on where the main ensuite has a shower tray set in on top of screed,this tray is 1.8m x.9m and is 100mm thick(high),
it is made from a backerboard type material,plumber fitted and coated sloped top with a good hardener,my prob is i have face edges to tile,they are the foam type edges of backerboard !!! any suggestions on what i should use or do here to tile it??
any help much appreciated.

 

[Andy Tiler]

Hi hillhead u should be fine with a flexi powder adhesive.:8:

 

[hillhead]

Hi hillhead u should be fine with a flexi powder adhesive.:8:

thanks Andy,thats what i was thinking but it's nice to read it,lol.
good man.
Maybe someone else has different ideas?

 

[wetdec]

Hi m8

Its the lux system, sits above floor level (bit odd but very good producer), treat as you would any other cement covered board. As mentioned a good flexi is general.

hope this helps.....

..