T
trammel
Evening all,
I have had a problem with a BAL WP1 shower kit. The shower will be fitted in a corner, one wall bonding coat and skimmed, the other plasterboard and skimmed. Both walls left for five weeks to dry out.
I sanded both walls and then used a stiff brush to remove any surface dust to get a key. Applied APD as per instructions, left to dry then put on two coats of membrane using the polyester tape as per instructions.
However when I removed the masking tape where the shower enclosure will meet a painted wall, the coating peeled of in one large piece(4 square metres). The only place it has adherered is where coating meets the paint mist coat.
Am I a muppet and missed something?.:huh2:
Any advice welcome
I have had a problem with a BAL WP1 shower kit. The shower will be fitted in a corner, one wall bonding coat and skimmed, the other plasterboard and skimmed. Both walls left for five weeks to dry out.
I sanded both walls and then used a stiff brush to remove any surface dust to get a key. Applied APD as per instructions, left to dry then put on two coats of membrane using the polyester tape as per instructions.
However when I removed the masking tape where the shower enclosure will meet a painted wall, the coating peeled of in one large piece(4 square metres). The only place it has adherered is where coating meets the paint mist coat.
Am I a muppet and missed something?.:huh2:
Any advice welcome