DJS
TF
Depends on size of floor. I used the keraflex on walls because of the extended open time, as I was doing the cuts as I went along.
With keraflex maxi on floors, you have to leave them 24hrs, before it's ready for light foot traffic. So if you lay the last one at 3pm, strictly speaking you should leave it until 3pm the next day before you can start to finish!
I used keraquick on the floor, as it's good for light foot traffic after 3 hrs. So I had enough time, I cut & dry laid all the tiles first. Then I mixed up the addy and stuck them all down with one mix. Then I knew I could confidently walk on it next day. Was 3.5m2 in brick bond.
How big is your's (ahem!) floor I mean? :lol: If its small enough go with a rapid set. But if you want to play it safe, and go with an extended open time adhesive give it 24hrs or whatever it says on the bag instructions.
With keraflex maxi on floors, you have to leave them 24hrs, before it's ready for light foot traffic. So if you lay the last one at 3pm, strictly speaking you should leave it until 3pm the next day before you can start to finish!
I used keraquick on the floor, as it's good for light foot traffic after 3 hrs. So I had enough time, I cut & dry laid all the tiles first. Then I mixed up the addy and stuck them all down with one mix. Then I knew I could confidently walk on it next day. Was 3.5m2 in brick bond.
How big is your's (ahem!) floor I mean? :lol: If its small enough go with a rapid set. But if you want to play it safe, and go with an extended open time adhesive give it 24hrs or whatever it says on the bag instructions.