bathroom help

[paulvdavies]

Hi,
Tiling a bathroom which has a new laid carpet and no current skirting around the perimeter of the room. If no skirting required could anyone advise as to the best way to finish down to carpet? May sound a stupid question and probably is! Thanks in advance of any advice.

 

[CJ CERAMICS]

is it bathroom carpet? if it is then there will not be any grippers the carpet should be down by its own weight or by systhentic spray adhesive. if its its own weight just lift back and tile to floor relay the carpet and using the back of your stanley knife score along the joint to create a grove, then either use a new blade or a good pair of scissors.... but cut the fall away pile first.
chris

 

[paulvdavies]

bathroom carpet....is that what you call tile! No carpet runs through upper floors so suspect it is standard carpet.
Thanks for advice.

 

[doug boardley]

wear latex gloves when taking it up round the toilet area!

 

[hillhead]

It could be stuck in that area too :yikes:,you might have to replace:yikes: oops!

 

[paulvdavies]

lovely!

 

[Deleted member 1779]

Ewww carpet in a bathroom.