Bowed wall

[steles]

I have nicked a corner of a bedroom to make an ensuite shower/toilet another bedroom. I am tiling the whole ensuite room, however one of the walls has is built with blockwork and plastered and has about a 10mm bow in the middle. Can I level this bow out by using bonding plaster on top of the original skim and then tile to the bonding. i.e. would the bonding adhere to the original skim?
thanks

 

[Dumbo]

Not a great idea , the best thing is take the plaster off and then fix jackoboard in its place flat and vertical as per manufacturers instructions .

 

[Dan]

Yeah I'd have thought making a structure over the top that's flat using plasterboard or a tile backer board will stand the test of time and he easy to tile to.

 

[Tile Fix Direct]

Orby 2400x600x12 or 20mm backer boards work well and the long solution is a time saver.

Orbry Waterproof Insulated Tile Backer Board (1200mm x 600mm)

Shop Orbry Tile Backer Boards from Tile Fix. Find Orbry products in our huge range of cement boards and tiling supplies. Free delivery on orders over £375ex.

www.tilefixdirect.com

 

[Dave]

How big an area is this bow in the wall and is it a convex or concave bow ?

 

[steles]

Hi thanks everyone for your advice. I decided to dot and dab a moisture board over the bow and that has done the job 😎😎