Cement Boards

[DIYMARK]

I am tiling a cloakroom and small lobby which have a new screed floor. I want perfection, and there are slight imperfections in the level so is there any problem with laying down aqua board? If so, does it require fixing?

Floating is a bit tricky because we there is a gap all around the floor where we have put wide foam strip for expantion (standing upwards) so the mix could leak away down the sides.

I am also battening out around a Geberit WC frame. Should I batten over the top of the frame or stop with battening level with the top?

I am thinking I will tile the top?

 

[White Room]

I would'nt be putting aquaboard on a screed floor, could'nt you use a self leveling....

 

[Ajax123]

Ditto whitebeam ...

 

[DIYMARK]

I would'nt be putting aquaboard on a screed floor, could'nt you use a self leveling....

For what reason? Self levelling is tricky because of gap around the screed floor for the self levelling to escape.

 

[Ian]

If you're worried about levelling compound running away, use draught excluder or Silicon to form a barrier, then remove once the leveller has cured.

 

[DIYMARK]

Is Aquaboard recommended to use for laying tiles in bathrooms on 18mm plywood?

 

[White Room]

I'd use 6mm hardie glued and screwed but it dos'nt prevent bounce/deflection on the floor...