T
The Legend; Phil Hobson RIP
If you are really stuck you can make your own. L shaped chrome trim sized to suit your tile back to back with the gap of 5mm, all you need to do is get hold of the right shade of Silicon, {you can get a chart) the choice is massive.
Once you have the right match, simply mask the trims to the outside edge allowing the metal to show,the rest is easy, gun the Silicon into the gap, making sure you get the joint full with no voids then using a tool you can buy any where providing you take the time in this stage to ensure you have a perfect finish, just wait till it cures then remove the masking tape,bobs your uncle.
A good few tilers from this forum visited my jobs and would not believe I had made them.
Once you have the right match, simply mask the trims to the outside edge allowing the metal to show,the rest is easy, gun the Silicon into the gap, making sure you get the joint full with no voids then using a tool you can buy any where providing you take the time in this stage to ensure you have a perfect finish, just wait till it cures then remove the masking tape,bobs your uncle.
A good few tilers from this forum visited my jobs and would not believe I had made them.
