concrete floor prep and SLC prep

[mikethetile]

i once stuck to the manafactures mixing instructions when making some yorkshire puddings they were as flat as a fart .dont believe everything you read

fat wasnt hot enough

you need it smoking

 

[diamondtiling]

i once stuck to the manafactures mixing instructions when making some yorkshire puddings they were as flat as a fart .dont believe everything you read

Was that a bagged ready mix for puds??

:lol::lol:

 

[Diamond Pool Finishers]

:lol::lol::lol:

 

[The Legend; Phil Hobson RIP]

I mix with 5 litre water, then help flow with feather edge.

 

[RodgerQ]

hi roger
how long has the concrete been down???
if its a while, then it will be very dry and very porous too!!
give it a quick scrape if there are any high spots and a good brush...sprinkle some water down too to grab the dust and put a bit of moisture into it (only if its not recently laid )
i would use sbr to prime and then hit it with your slc
mix it in a gorilla tub and pour ...dont hang about too much, pour spread out with a trowel or squeegee etc and when you have done a section use a spiked roller to take any air bubbles out.....then onto the next section till done
you can pick a cheap spiked roller up from ebay for around £19-00
make the mix so it runs easily, let it do the work if you get my point
ed

cool i'll get a roller ordered or see if i can pick one up at Tile Giant when i'm up there.
the concrete has been down as long as the house has been built so about 60 years lol.
so use SBR to prime the floor, pour the SLC then prime that with PRIMER G then?
rodgerq

 

[diamondtiling]

In a nutshell............yes.