corner nightmare

[scone2006]

anythought s on getting round this i am using 12.5 homeuix trim the tiles are 9.5mm thick can you help

 

[bigneil]

what's that thing stuck to the wall, are you going on top of that?

 

[scone2006]

lol sorry mate thats adhesive on the wall tills are going along there and trim on th top the other trim on the other side off the wall and the strip going down are loose cuts of trip the trim has to go all the way around the wall lol any help would be a big help !!

 

[smurf21]

for starters who supplied the trim, genisis do a 10mm trim with 10mm exteral corners to form three way mitres you could try homelux for their external corner range.

 

[bigneil]

i just dont know what you mean, where is the trim going and what is that on the left hand wall, are those tiles? and what is the black stuff?

 

[scone2006]

ok mate the trim is the black stuff , on the first pic on the left hand side there is tiles going up the wall i have placed trim on top off the tiles and down one side, on pic 2 this is were i am going to be laying tiles level with the other side but need to put trim along both side off the wall thus having a 3 way mitre with out sharp edges and not looking tacky

 

[smurf21]

ok instead of trying to mitre round the angle and without using a three way, on the return do your upright and a flat mitre to the top and butt the return into the back of the mitre the corner wont be as sharp but still not perfect.

 

[bigneil]

do thee pics help?

 

[bigneil]

these ones sho it done with a corner piece

 

[mz30]

I have an idea ,as i can't really see what your getting at with the pictures(must be my browser)cut the trim that meets the reveal square, then mitre the vertical piece and the horizontal piece that sits on the reveal(does that make sense)?

 

[scone2006]

thought about that mate but thought it looked kinda rough mate the contractor is kinda a perfectionist where could i buy a three 3 corner already done ect ect

 

[mz30]

While you can probably get them ,i have never seen one ,if you trim them top tile down a couple of mm on the reveal you will get it to sit perfect and the contractor should have no qualm's.

That'a how i usually cut plastic tim if they have no corners available

 

[scone2006]

neil the picture with the chrome trim and the tiles with a patteren in the middle is the finish i am after

 

[mart1]

Hi Mate, Just get in touch with floor & wall solutions at www.tilerstilingtiles.co.uk forum and you'll find what you're looking for.

 

[bigneil]

that one was done using a triangular corner piece, made by Blanke, as some others have sugested most of the companies making trim, do a corner of some description




http://images.google.co.uk/imgres?i...trim+corner&start=20&gbv=2&ndsp=20&hl=en&sa=N