poynton phil
TF
Going to be doing a job that's got wet ufh. Noticed a crack, that was there before the ufh was started up, so I'm presuming it was a stop/start point in the screeding
Its less than 3mm wide. Would i get away with putting a strip of Mapeitex membrain over it going 3 - 400mm either side of the crack
Any advice is appreciated, thanks.
Its less than 3mm wide. Would i get away with putting a strip of Mapeitex membrain over it going 3 - 400mm either side of the crack
Any advice is appreciated, thanks.