Custom made tray

[Dumbo]

Tile source hedge end . London Tile company winchester . Hampshire tile warehouse Aldershot all the same company

 

[Ttt1601]

Good to know, cheers mate

 

[Old Mod]

Where is Hampshire tile warehouse?

Essex!

 

[Ttt1601]

Essex!

Alright smartarse!!

 

[martin1c]

Can't you just buy the biggest readily available tray and then use backer boards set to the correct falls for the rest of the room? Should be easy enough to do if you ping a laser around the room to find your heights.

All joints can then be sealed and taped. If you were still worried you could even use Schluter kerdi over the top

 

[congokeith]

Hi radim
I'm looking for a made to measure tray 1600X1200. so I
went up to Hampshire Tile in Aldershot to look at an ORBRY tray . light weight, 30mm thick, only a couple of weeks delivery and cheep.
trouble was the linear drain was micky mouse as there's no frame to tile up to so you have to stick your own trim round the opening, I'm sure it can be done but the drain and trap all looked a bit cheep
The square drain may be better but I didn't look at that one
Im now looking at using a standard size tray with a good drain and building up round the sides
I think Pro Warm is the same tray.