Cutting Marble Mosaic

[skymole]

I have a Rubi wet saw - it seems that I am going to struggle with this trying to cut mosaic!
What would people suggest as the best way to cut 23 x 23 x 10mm thick marble mosaic?
Should I use a mini grinder with a diamond tile disk?

thanks
sky

 

[Tony73]

Hi, yes you can cut with angle grinder. Or you can put some piece of 12mm ply on wet saw table(bit bigger than sheet of mosaic) and cut it. Some times i stick 1" masking tape on mosaics where i need to cut

 

[Diamond Pool Finishers]

i use a 115 angle grinder , i cut so many over the years i only need to see the size of cut i need then usually can guess the cut , but this only comes with repetition .........

 

[skymole]

Thanks for the advice - I had thought about the ply option too - any recommendations of disks or will any major brand disk do?

 

[Time's Ran Out]

Best to cut dry with an angle grinder and diamond wheel outside. This way the mesh stays together.

 

[Peter]

Usually just use the Sigma manual cutter with cardboard under the mosaic if it's into a corner. rrr: