First Floor

[turtle-tiling]

Hello all on forum, just after a bit of info matey's, got job doing bathroom and floor. the floor is 4m2 t&g whats the best ply to use and do i need to seal it and if so what with? walls 16m2 one window only bath in room no toilet and basin, they are going in after what would be an ok price for the lot floor and walls. any advice would be greatly appreciated cheers:8:

 

[GazTech]

Hello all on forum, just after a bit of info matey's, got job doing bathroom and floor. the floor is 4m2 t&g whats the best ply to use and do i need to seal it and if so what with? walls 16m2 one window only bath in room no toilet and basin, they are going in after what would be an ok price for the lot floor and walls. any advice would be greatly appreciated cheers:8:

Secure the T&G then screw 6mm backer down....2 part flex adhesive, flexi grout.....Gaz:yes:

 

[turtle-tiling]

cheers gaz, you say secure t&g , you mean by add ing extra screws so there is no movement. screw backer down do i tape up edges on the backer board?