First Stone Tiling Job - Honed Slate - Which Cutter?

[arttay10]

HI - New to this forum.
This is my first 'Hard' Tile flooring job - Laying 18mtrs 12mm Copper Honed Slate Tiles on a Conservatory Floor. I've been in Flooring for 12 years - doing Amtico and Karndean, so basics should'nt be a problem.
What I'm stuck on is which cutter to buy??
I've looked at the Cordless 12V Makita Wet Saw - whiich looks pretty compact, But, my 'tool crazy ' mind keeps looking at a Rubi Wet Saw .....

Any advice or swaying - is greatly appreciated from you seasoned Pro's.
Thanks.

 

[enduro]

Hi mate, those makita cordless are good on ceramics, wouldnt use one on natural stone, get yourself a wet cut, depends how much tiling you are going to do, to the cost of buying a rubi, as there are some cheaper wet cutters about. good luck

 

[DHTiling]

hi and welcome. i have used a rubi d200 wet saw for yrs now and is a very powerful machine, not cheap but good piece of kit also have rubi dw250n wet rail cutter for large stone floors also good machine.... good luck with job mate............

 

[GazTech]

We have a cheaper alternative to the Rubi rail cutter QEP yellow cutter £199.Personally I would have the Rubi if I had large format work to do long term

 

[arttay10]

HI Gaz,
Do you have a link for me to look at the QEP cutter?

 

[GazTech]

HI Gaz,
Do you have a link for me to look at the QEP cutter?

I'll have a look

 

[arttay10]

Thank you Enduro and David for your advice and comments !!

Its greatly appreciated and well worth asking before buying !

 

[GazTech]

HI Gaz,
Do you have a link for me to look at the QEP cutter?

Sorry mate not shown In QEP or Vitrex sites,is only exclusive to Topps so call in and see one

 

[arttay10]

No worries Gaz,

I'll give one a look over.