First Timer Metro Tiles On Wonky Walls

[morganste]

Ended up taking the plaster right back to the brick, so this is where I'm at today.

Hopefully I've done this the right way....

Just have to wait for the adhesive to dry and I can crack on with the tiling.

The bag says 180 minutes for initial set. Would this be strong enough to tile on?

 

[Wishiwasatoptiler]

Think that depends on depth of board adhesive used. Looks nice now to tile off. Might as well wait till tomorrow if your not pushed for time.

 

[morganste]

So there we have it. My very first DIY go at tiling.

I've probably made plenty of mistakes but I'm happy with it. Just the grout now!

 

[Old Mod]

Well for first attempt, pretty good.
For future ref tho,
Would have put a full tile top of window reveal instead of cut.
On cooker wall u've extended up a full tile, because of extractor obviously,
But u should have mirrored that elsewhere too.
Can't see in corner of window/kettle wall cos of what looks like a music speaker, haha but would have moved window set out left to eliminate small piece on side of window reveal.
U would have had jus one small piece being cut in to boxing left of window.
The fact that u've left boxing un tiled actually looks ok, although not the 'norm!' But then what is nowadays? Haha
In the second pic down, u can see what I mean about cut tile on top of window reveal against line of tiles on cooker wall, it looks lopsided.
None of this is criticism, just observation, it's a good job!
Excellent choice of impact driver too!

 

[Martino]

As 3 fall says you have done a really good job on this being your first attempt. I agree with his constructive criticism.
Something I learned from this forum is that a good tiler will know his last cut before he has even started tiling.....by this I mean take time on setting out before you start, to make sure it will end exactly how you will like it .
Well done again

How did the grouting go?