Fitting Plastic Bath Panels

[newpark7]

Hi all

Any ideas on retaining methods for plastic bath panels? I have just finished tiling bathroom for customer and they asked for the bath panel to be fitted, it is a new P shaped shower/bath. I have cut the panel ok but cannot see any method to hold the panel in place, the customer has contacted the manufacturer who say that a fitting kit is not available.

I cannot believe it is supposed to just sit ther with no fixings has anyone got any ideas?

Thanks

Mark

 

[GazTech]

You can buy, self adhesive strips of velcro from any habadashery, fix them at the points you need to be held onto framework, where the panel meets tiles at the ends, Silicon 2x1 pieces for panel to velcro too.....Gaz

 

[DHTiling]

Have a look at this pdf it will give you some idea of how this type of panel is fixed in situ....

http://www.twyfordbathrooms.com/default.asp?path=1;39;42;8784;29835​

 

[newpark7]

Hi Gaz & Dave

Thanks for the info it was very useful - I am going back on Tuesday to fit.

Mark