Discuss FLEX Polisher Grinder with Dust Extraction. in the Australia Tiling Forum area at TilersForums.com.
C
Concrete guy
No it wouldn't, it's a shroud designed for the machine being used as a polisher/surface grinder (in the orientation pictured or held against a vertical wall).
The shrouds for cutting really aren't very effective and so far all the ones I've looked at are a bit Heath Robinson.
Plus this machine has a speed range of 600 - 2100 rpm so it's not really designed for cutting.
It's the kind of thing you'd use to remove localised lumps and bumps on a wall or in a floor screed. Or polish the edges of floor after doing the main area with a large rotary machine.
Last edited by a moderator:
cam_low
TF
C
Concrete guy
Not at the moment, however there is a 110v 125mm polisher/grinder with dust extraction in the pipeline.
They currently produce a machine at 115mm but it's too small, it needs to be a 5" machine and they are responding to requests for one.
C
Concrete guy
£380 + vat
P
Pit-R
As an Amazon Associate we earn from qualifying purchases.
C
Concrete guy
That is cheap.
It's from Germany though, meaning you'll need to re plug it, which I think voids the warranty but I'll need to check with our Flex rep.
As an Amazon Associate we earn from qualifying purchases.
Reply to FLEX Polisher Grinder with Dust Extraction. in the Australia Tiling Forum area at TilersForums.com
There are similar tiling threads here
Hi there,
I’m not an experienced tradesperson by any means, so wanted to pose a question on...
- JSMPJA
- America Tile Forum / Advice Board
- 6
- 2K
TilersForums.com has been online since 2006 and we've had many designs, even three forum...
- Dan
- America Tile Forum / Advice Board
- 1
- 3K
Hi all
I need to get myself set up with dust extraction after asking a customer to move there...
- merit
- Canada Tile Advice
- 5
- 3K
So I was recently asked to fit some 3m x 1.5m 6mm thin porcelain in a new tile showroom. Mapei &...
Hi
We've knocked through our kitchen and dining room and taken up old stone/porcelain tiles in...
- EdMac
- Canada Tile Advice
- 22
- 7K