French new to this forum , having question on very large tiles

[superteo01]

lol ! that is so funny ! brilliant
just quick up date ! thanks to you advise i have tiled up 80 % of my room now using a dunlop flexible cement based adhesive which was in fact dead easy to mix up however , i am now struggling ti draw the 2 holes to passe the shower mixer to connect to the copper pipes behind. i have already spnd a frotune on special diamon drills and other diamond holes saw but this tiles are bloody though ! i saw there is a thread , on here for drilling holes so i may have a look . i have already spend 20 minutes yesterday with a special porcelain\glass drill and i have onlu managed to drill 5 millimetres!
Zut alors!

 

[mikethetile]

365 drills make diamond bits that will do the job

click on his link on this site

 

[faithhealer]

365 drills are the name you should be looking for
ps welcome to the forum

edit, beat me to it Mike lol

 

[superteo01]

well, may order a kit and carry on next week end ! thanks for the advise , guys , apparently , having had a look to a few comments on here , looks like that's the only kit that does the job !
did one of you already used it ?

 

[faithhealer]

well, may order a kit and carry on next week end ! thanks for the advise , guys , apparently , having had a look to a few comments on here , looks like that's the only kit that does the job !
did one of you already used it ?

think most of us have one lol, use mine all the time

 

[superteo01]

thanks faithhealer ,

 

[Deleted member 1779]

Yes if you want a set of diamond cores, hole saws or drills to cut through the standard service pipes AND the smaller drills for 6mm and 8mm rawl plugs then you need the multipack Bathroom Fitters Kit.

This will save you time and money by letting you drill ALL your pipes into the bathroom.

Bathrooms have a range of service pipes but the good news is that
they are all a standard size which is catered for in the kit above.

If you need specialist sizes for example an 80mm to open a hole for a shower valve

The we have specialist sizes available off the shelf for fast delivery.

That way we can cover the standard sizes of 6mm 8mm and service pipes. AND we can cover all those other sizes too. As a tiler you have a full range at your disposal.

Best of luck !

 

[Bolter]

well, may order a kit and carry on next week end ! thanks for the advise , guys , apparently , having had a look to a few comments on here , looks like that's the only kit that does the job !
did one of you already used it ?

There are other hole drilling kits out there that will do the job perfect, but the 365 bits are a whole load cheaper, and do the job very well indeed.

 

[Deleted member 1779]

This is our main video

[yt]W2CXLSjpVhU[/yt]

 

[superteo01]

hi richard , where do i go to order it?how much it is and how long does it take to receive the kit at home?
cheers