Gap in wall at end of bath

[Scottish Mark]

Hi,

I have a job 10m2 wall tiling, customer wants me to tile on top of existing tiles which are 6x6 and want's to use 4x4 but the wall at one end of the bath just above there is a gaping hole which is about 2ft wide and 6inch high i have suggested that she removes tiles and puts new plaster board up. She has asked if there is anything that would fill the hole any help would be grateful.


Mark

 

[GazTech]

Hi,

I have a job 10m2 wall tiling, customer wants me to tile on top of existing tiles which are 6x6 and want's to use 4x4 but the wall at one end of the bath just above there is a gaping hole which is about 2ft wide and 6inch high i have suggested that she removes tiles and puts new plaster board up. She has asked if there is anything that would fill the hole any help would be grateful.


Mark

If the wall is solid behind ( i.e boards dot and dab ), you can prime then stick ceramic or plasterboard in there tilll flush....Gaz

 

[frogeye]

Hi mark
I think you have just answered that yourself.
Remove any old tiles and plasterboard it. I would tell her it's the best way to go.
Ardex AM100 can fill big holes up to 20mm at a go - can you use this?
Only trouble I have found is getting hold of the stuff!
frogeye