R
Rich
Not a brand that I have used to much to be honest but know that a fair number of the guys on here use it and think its good stuff so I thought Id put up a little bit of info about Granfix adhesives. I am going to leave out the ready mixed adhesives as I would always recommend a power over a paste. Hope its some help to some1 :smilewinkgrin:
CFTA Standard
CFTA Standard
- High Performance
- Sets in 24 hours
- 3mm-12mm bed thickness
- Rapid strength development
- Sets in 2 hours
- Same day grouting
- 3mm-12mm bed thickness
- Sets in 3 hours
- Same day grouting
- 3mm to 12mm bed thickness
- Rapid setting
- Sets in 3 hours
- 5mm-25mm bed thickness
- Flexible for use on strengthened wooden floors
- Sets in 1 hour-same day grouting
- 3mm to 12mm bed thickness
- only use between 5C - 15C
- Flexible for use on strengthend wooden floors
- Sets in 2 hours-same day grouting
- 3mm-12mm bed thickness
- only use above 15C
- Flexible for use on strengthened wooden floors
- Sets in 2 hours-same day grouting
- 3mm-6mm bed thickness
- Rapid strength development
- Sets in 2 hours
- Same day grouting
- 3mm-12mm bed thickness
- No shadowing
- Rapid strength development
- Sets in 2 hours-same day grouting
- 3mm-12mm bed thickness
- Suitable for calibrated and uncalibrated slate
- Flexible for use on strengthened wooden floors
- Rapid strength development
- Sets in 3 hours-same day grouting
- 5mm-25mm bed thickness
- Single part-no additive required
- High performance
- Sets in 24 hours
- 3mm-12mm bed thickness
- Single part- no additive required
- For areas with slight movement eg. asphalt, strengthened wooden floors
- Sets in 2 hours-same day grouting
- 3mm-12mm bed thickness
- Single part-no additive required
- For areas with slight movement eg.asphalt,strengthened wooden floors
- Sets in 3 hours-same day grouting
- 3mm-12mm bed thickness
- Single part-ne additive required
- For use on floating floors and existing floor boards
- Sets in 2 hours-same day grouting
- 3mm-6mm bed thickness
- Flexible
- Single part-no additive required
- Suitable for both matting and piped underfloor heating systems
- For areas with slight movement eg. asphalt, strengthened wooden floors
- sets in 2 hours-same day grouting
- 3mm-12mm bed thickness