Discuss Grout haze over walls and floor. in the Canada Tile Advice area at TilersForums.com.

O

On one

If it is obvious that grout haze is going to be a problem(Probably is by the time you have read this) I would just leave the floor alone. The more you go over it,the more grout you will wash out of the joints.
Leave the floor until tomorrow morning,give Lithofin Tech Dept a ring and they will sort you out for what you need to do.
This info is very dependant on your situation though.......walls,floors,risk of acid etching surrounding fittings,type of grout???? and so on. So a bit more info required.
 
Hate to be negative, but I had this issue with porcelain floor tiles.
Tiles were lightish wood affect, used a "Tobacco" colour grout. Grouted the 4mx4m room and then cleaned off. The grout left a haze which turned out to be a stain.
Hit it with all I could plus advice and the room is the same, no better.
Faced with the rest house to do on that level.
After grouting 1mm joints the grout was removed much quicker and frequently. It worked and proved the grout was staining.
 

Reply to Grout haze over walls and floor. in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hi, Just wondering what the general consensus is with grout for a shower. I have epoxy grouted...
Replies
0
Views
807
Hi all , it’s been years since last posted for advice and your methods . My question is this ...
Replies
5
Views
920
Hi, Need to choose a grout for the above. For the black floor tiles 300x600 am thinking either...
Replies
4
Views
551
    • Like
Hello, after tiling the kitchen area I did grouting but I am not happy with the results. The...
Replies
10
Views
862
Hi All Had a panic when we had to rip out some of our floor tiles after a plumbing leak...
Replies
0
Views
372

Advertisement

Thread starter

Joined
Location
wolverhampton
Business Name
1971

Thread Information

Title
Grout haze over walls and floor.
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
12

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.1%
  • Kerakoll

    Votes: 14 9.5%
  • Ardex

    Votes: 11 7.4%
  • Mapei

    Votes: 44 29.7%
  • Ultra Tile

    Votes: 17 11.5%
  • BAL

    Votes: 35 23.6%
  • Wedi

    Votes: 3 2.0%
  • Benfer

    Votes: 2 1.4%
  • Tilemaster

    Votes: 21 14.2%
  • Weber

    Votes: 18 12.2%
  • Other (any other brand not listed)

    Votes: 15 10.1%
  • Nicobond

    Votes: 7 4.7%
  • Norcros

    Votes: 3 2.0%
  • Kelmore

    Votes: 4 2.7%
Top