- 0
- 486
Following on from my previous threads and endless reading of other posts i have finally decided how i will proceed with tiling my 8m2 bathroom floor. The chipboard floor will be overboarded with 18mm ply, Marmox 10mm tile backer board and fitted with 3mm UFH mat before laying 400x900mm porcelain tiles.
This is my checklist and would like to know if i have missed anything and what quantities/products are recommended.
I will also need to purchase all tiling specific tools so guidance in this area would be welcomed.
1. 9m of Porcelain tiles
2. Flexible Adhesive
3. SLC
4. UFH (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox
7. Screws/Washers for Marmox
8. 18mm Plywood
9. Screws for Plywood
This is my checklist and would like to know if i have missed anything and what quantities/products are recommended.
I will also need to purchase all tiling specific tools so guidance in this area would be welcomed.
1. 9m of Porcelain tiles
2. Flexible Adhesive
3. SLC
4. UFH (Warmup 2mm 150W electric mat)
5.10mm Marmox Board
6. Flexible Adhesive to lay Marmox
7. Screws/Washers for Marmox
8. 18mm Plywood
9. Screws for Plywood