hello to 1 and all

[gltiling]

Greetings everyone,great forum

A friend of mine wants me to help him lay 100m2 of 600 X 400 mm marble tiles in his hallway running into his open plan sitting room/kitchen. What size wet cutter should he use? I suspect he'd be better to hire one out as he'll need something with high rpm and high wattage that you're average tile shop or DIY shop wouldn't stock. Is this the case?

 

[grumpygrouter]

Check out CTD if you have one near you. They hire out cutters and would be able to advise which one would be suitable.

 

[GazTech]

Welcome to the forums.....Gaz

 

[dean39]

Hello and welcome to the forum mate...............

 

[sWe]

Welcome to the forums

 

[faithhealer]

Welcome to the forum, good luck with the floor

 

[DHTiling]

Hello and welcome to the forums...........if you require advice on adhesives / sealing etc...then just shout out there is always somebody about......

 

[redeye1979]

welcome pal.

 

[White Room]

Hello and welcome

 

[Tulsa]

Hi there and welcome to the forums