HELP!! I want to change colour of existing grout

[askandie]

Hi, I have white ceramic kitchen floor tiles, which I put white grout in 18months ago, this grout has become stained,dirty, and will not clean, I have tried allsorts, so I thought I would change the grout to Grey, will I have to remove the white grout or can i put the grey on top of the white, there is quite a deep ridge between the tiles, the grout is not flush with the tiles. A x x :yes:

 

[enduro]

You really would need to remove as much grout as you can from the joints, how big is the floor? and what area are you from as somebody on this forum could possibly remove grout for you.

 

[lux stone]

Hi, I have white ceramic kitchen floor tiles, which I put white grout in 18months ago, this grout has become stained,dirty, and will not clean, I have tried allsorts, so I thought I would change the grout to Grey, will I have to remove the white grout or can i put the grey on top of the white, there is quite a deep ridge between the tiles, the grout is not flush with the tiles. A x x :yes:

Aquamix do a grout re-colourant which is available in a variety of colours which would do the job as long as the grout is not cracked.

 

[askandie]

Hello! the floor is 'big' !! would I need to remove the grout if i re did it in white?? last time I did not seal the grout !! big mistake - there is no cracking or loose grout anywhere, so I I did it in white again and then sealed it ??

 

[tysfoot]

get a fein multimaster

 

[askandie]

sorry - think I am a dumb blonde !!!! what one of them ????? x x

 

[Gazzer]

sorry - think I am a dumb blonde !!!! what one of them ????? x x

One of these....http://www.buybrandtools.com/acatalog/Fein_Multimaster.html

 

[grumpygrouter]

Its a machine that works with a reciprocating action. It has a special blade for removing grout!

Grumpy

 

[askandie]

cool - looks like a goog investment...x x

 

[Gazzer]

Its actually probably one of the best tools i have ever bought. Shame the blades are so expensive to replace, so take care of the saw blades.

 

[DHTiling]

Here you go watch this video it will show you how it works...........

[yt]nynD2SfyINU[/yt]

 

[askandie]

will do and thanks x x

 

[Gazzer]

I was surprised by the noise it makes though, quite loud.

 

[askandie]

Here you go watch this video it will show you how it works...........

[yt]nynD2SfyINU[/yt]

Hey Dave - that looks fantastic - what a terrific site this is - everyone so lovely x x

 

[askandie]

Flippin fantastic !!! thanks x x x