Hi Guys Mitring Tiles

[J Sid]

got one of these but never gone on with it

 

[Unused Account 1]

The wiz mitre available in australia very cheap ,looks the easy option

 

[Spud]

got one of these but never gone on with it
View attachment 81132

Take for ever to mitre a porcelain tile with one of those Julian, I prefer to hand cut with a diamond blade and finish with a polisher but thought finishing with one of those mitring profile wheels might work but every time I tried the wheel chipped the mitre edge or scored/ burned the edge of the tile

 

[J Sid]

Take for ever to mitre a porcelain tile with one of those Julian, I prefer to hand cut with a diamond blade and finish with a polisher but thought finishing with one of those mitring profile wheels might work but every time I tried the wheel chipped the mitre edge or scored/ burned the edge of the tile

yes it was a waste if money 🙁

I see many use a sponge with the blade, never found I need this on 'normal' tiles, is it essential on thin tiles to stop over heating and chipping?

 

[Unused Account 1]

Been mitring porcelain ,whatever you use ,has small chips hard to do for anyone

 

[Old Mod]

Been mitring porcelain ,whatever you use ,has small chips hard to do for anyone

Don't understand why u get chipping?
Tile only chips if it starts to break out cos you're too close to the face of the tile.
Are u trying to cut a mitre through the face to cut the tile to size at the same time?

 

[Unused Account 1]

Yes as the client wants full tile from external corner,i seen it on his other jobs five bathrooms everyone same ,i wouldnt accept it ,hes been abroad to much lol

 

[Old Mod]

Yes as the client wants full tile from external corner,i seen it on his other jobs five bathrooms everyone same ,i wouldnt accept it ,hes been abroad to much lol

U answering my question Ray?
I don't follow you.
So you're not mitring a full tile, but part way thro it?

 

[Unused Account 1]

Im mitring the tile at the end of the tile ,the porcelain is expensive ,but very chippy ,even if mitre anywhere on the tile the same ,about 4 or 5 guys all the same ,hope i explained enough marc ,cheers

 

[Old Mod]

Im mitring the tile at the end of the tile ,the porcelain is expensive ,but very chippy ,even if mitre anywhere on the tile the same ,about 4 or 5 guys all the same ,hope i explained enough marc ,cheers

Yeah kinda haha
Still not sure how they're chipping.
U shouldn't be that close to the face, first u undercut along the edge to about 2-3mm away from face, then polish the final bit off , so that u stop a mm from the face. No chips.