how do you do this ?

[ian158]

whats the art of doing this on external corners

 

[Bubblecraft]

3 way mitre. A little tricky at first but once you've done a few, it gets pretty easy

 

[ian158]

ill see if youtube has some guides

 

[Bubblecraft]

Courtesy of Macten

 

[Bubblecraft]

Easy enough to do on plastic. Metal trims are a little trickier. Especially if the boxing isn't spot on

 

[ian158]

have to start practising when Im back in uk me thinks

 

[Gazzer]

Just buy the corner pieces....job done.

 

[ian158]

you cant get corner pieces for all types of trim though, wont hurt to learn on some scrape I suppose..

 

[Bubblecraft]

As Neale says, pre made corners make life much easier

 

[DHTiling]

IMHO they loook $hitee ... 3-way mitres are pants..

 

[Dougs Third Go]

what do you want to know Ian,,,the tile trim or the grouting techniques?

 

[trevortine]

As Neale says, pre made corners make life much easier

Even nicer when there fitted correctly, must be a bit of strain on that one to knock grout line off by 5mm surely?

 

[Bubblecraft]

Is fitted correctly, no strain & is not running out

 

[trevortine]

IMO it should be fitted flat on top of bulkhead, pulling your wire about strain and the grout line above wc on corner maybe isn't running out 5mm, more like 6mm.

 

[PaulSmith]

Fairly simple once you get the hang of it.