How much adhesive to use

[CathyS]

Hi there, we are re-tiling our bathroom, putting new tiles over existing tiles. We have put primer on and are wondering if it is better to lay a bed of adhesive on the existing tiles on the wall or can we just put blobs of adhesive on the back of the new tiles? Tiles are 600 x 300, 10mm deep.

 

[CJ]

TBH, I would not put a tile of that size on top.

They will be heavy and your tiling is only as good as the base they are going onto. Do it right in the first place and you will have no problems.

Check out this video on YouTube:


Orange Juice - Rip it Up (Official Video) (1983) - YouTube


2nd time today for the above. :smilewinkgrin:

 

[AliGage]

I can't see your walls taking the weight to be honest.

 

[White Room]

As above, I'd ripping off the existing tiles, as mentioned there is a lot of weight going on the wall.....

 

[cam_low]

Do it right do it once

 

[Time's Ran Out]

Cathy - please get a qualified tiler to estimate for this work! You need help and 600x30mm are not DIY friendly.

 

[charlie1]

Cathy - please get a qualified tiler to estimate for this work! You need help and 600x30mm are not DIY friendly.

Jeeso, they must be skinny tiles lol ;-)

 

[PaulSmith]

Also, what tiles are you fitting?
I'm with the above comments, too heavy.

 

[Stef]

Hi there, we are re-tiling our bathroom, putting new tiles over existing tiles. We have put primer on and are wondering if it is better to lay a bed of adhesive on the existing tiles on the wall or can we just put blobs of adhesive on the back of the new tiles? Tiles are 600 x 300, 10mm deep.

As all of the above, Can you tell us what "Primer" you used please?

 

[steve187]

if the tiles are 10mm porcelain about 24kg/m2 then they will be heavy for overtiling and for tiling onto plaster, you will need to have bare plaster board or a tile backer board, max weight - plaster is 20kg/m2, and for bare plasterboard 32kg/m2, tile backer boards about 40 kg/m2 on top of the tile weight allow about 5kg/m2 for adhesive and grout.

all weights are from memory .

 

[judge]

Dont Hardi say 100 kg limit now !!!!

 

[mz30]

And regardless of tiling on tile (which is a no-no,especially with that size tile)dont put blobs on the back of tiles ,you need as much coverage on the back of tile as possible and should be using a cement based adhesive (not ready mixed tubbed stuff)If your planning on doing this as a diy job have a serious re-think,it would take a pro 2-4 days to do it right and would take a diy-er 2-4 weeks to do it wrong.