Discuss Independant tile adhesive testing in the Canada Tile Advice area at TilersForums.com.

M

mickbrick

I have experienced a problem with Ardex X32 adhesive on external porcelain tiles on a patio and pool area. The adhesive appears to have failed to stick to either the tile or the concrete base. Although Ardex experts are looking into this, I would prefer to get independent advice. Can anyone advise on a suitable expert or organisation that can carry out this kind of assessment? Thanks
 
R

Rookery

I believe the TTA do some kind of testing but I think it is very expensive, many hundreds of £'s. No doubt a TTA member on here will confirm. Before you do this, are you sure that the job was done to spec? IE was the slab dry, primed, addy mixed correctly, temps not too hot or too cold, did you back skim the tiles, thick bed fixing, movement joints etc etc. There are lots of reasons why there are problems, in my experience it is rarely if ever a product fault. We'd be interested to know the outcome so please keep us informed.
 
R

Rizzle from the Portizzle

look up ceram they will do this test keep samples of the adhesive you used even if you scape them from the bed or back of tile still can be tested now you need to give the rep a sample and you take a sample bouth of you sign and date then send yours off for testing once had this and the end result was to much sand in the adhesive but they told me it was estermose release well when i challenged them with my test results they then said there had been a mistake in the prodution and sorted this out at there cost good luck with this its not always the tilers fault
 

Ajax123

TF
Esteemed
Arms
932
1,213
Lincolnshire
I have experienced a problem with Ardex X32 adhesive on external porcelain tiles on a patio and pool area. The adhesive appears to have failed to stick to either the tile or the concrete base. Although Ardex experts are looking into this, I would prefer to get independent advice. Can anyone advise on a suitable expert or organisation that can carry out this kind of assessment? Thanks

Try neil beningfield Neil Beningfield
 

Reply to Independant tile adhesive testing in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Just seen Rocatex on uHeat.co.uk and thought hmmm that's a new one on me. Anybody used it yet...
Replies
3
Views
2K
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
2K
Hi all, I'm looking to tile the entirety of our small patio area with either brick slips or...
Replies
1
Views
994
Hi All, I am wondering if someone would be able to help me out/explain something. We had a...
Replies
2
Views
2K
Can I trouble some experts in here for some advice on laying pavers on a concrete pool surround...
Replies
1
Views
1K

Advertisement

Thread Information

Title
Independant tile adhesive testing
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
4

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 6.1%
  • Kerakoll

    Votes: 13 8.8%
  • Ardex

    Votes: 11 7.5%
  • Mapei

    Votes: 44 29.9%
  • Ultra Tile

    Votes: 17 11.6%
  • BAL

    Votes: 35 23.8%
  • Wedi

    Votes: 3 2.0%
  • Benfer

    Votes: 2 1.4%
  • Tilemaster

    Votes: 20 13.6%
  • Weber

    Votes: 18 12.2%
  • Other (any other brand not listed)

    Votes: 15 10.2%
  • Nicobond

    Votes: 7 4.8%
  • Norcros

    Votes: 3 2.0%
  • Kelmore

    Votes: 4 2.7%

Birthdays

Top