Joints less than 1mm

[jofusmofus]

Hi all,

Just wondering if anyone knows of any grout for joints of less than 1mm or if not, what is the finest grout available in charcoal or grey?
If grout simply isn't an option does anyone know of any brush on waterproof kind of sealer which wont change the appearence of slate tiles too much but will fill these 0.5 mm ish wide joints? I guess I need something which will form some kind of skin over the tiles?

Thanks for all advice in advance

 

[Pebbs]

Have you thought about resin filling the joints? You've set yourself up for some hard work.

Pebbs

 

[jofusmofus]

I hadn't thought about that no! What kind of resin would you suggest?
Hard work I know. Should have thought about that at the start really I suppose!

 

[Dan]

Not sure what would work. British Standards says minimum joint for walls is 2mm and floor 3mm. So the manufacturers sort of work to that.

Not sure if an epoxy would do it? What's the minimum you can go with that?

 

[Alan.P]

I wouldn't like to fix anything at less than 2mm never mind 1mm and less, are we talking walls or floor here ?

 

[jofusmofus]

walls. These mosaics come ready made in a slab of about 5 strips of the mosaic together from the manufacturer so not much I can do about that.
Any ideas what the finest grout available is anyone?

 

[The Legend; Phil Hobson RIP]

I have used Norcross a very fine grain grout Norcros Adhesives

 

[jofusmofus]

Thanks Phil...that might be the answer! Anyone know of anything finer before I go ahead?

 

[The D]

i used to fit porcelenosa tiles butt joint and grout in Mapei grout i never had a problem.

 

[jay]

any pics

 

[peckers]

Porcelanosa do a non sanded fine grout! im using it at the moment in deep red colour, dont know what colours they do it in tho. its like putting in thick yougurt!

 

[jofusmofus]

i used to fit porcelenosa tiles butt joint and grout in Mapei grout i never had a problem.

What kind of Mapei grout did you used mate?

 

[jofusmofus]

Porcelanosa do a non sanded fine grout! im using it at the moment in deep red colour, dont know what colours they do it in tho. its like putting in thick yougurt!

Any ideas on the name of the grout? Do you think it would be OK for such fine joints?!

 

[The D]

What kind of Mapei grout did you used mate?

products

 

[Pebbs]

This is a contract on with 1mm jointing, we tried a load of diff types of grout, in the end we filled with akimi and then spun it off afterwards, it works well but its a long tiresome process.

Pebbs