Kitchen floor

[alarmeng]

Hi guys just after a bit of info if anyone would be so kind.

What i have done is used "Tilemaster Levelflex" to level the concrete floor.

As im going to use UFH i was going to line the floor using 6mm Marmox boards then tile ontop of the Marmox.

What im unsure about is do i need to use flexi adhesive on both the Marmox to the floor AND tiles to the Marmox or can i use non flexible adhesive.

Sorry a bit long winded but had to get it all across.

Many thanks

Gaz

 

[jimbob]

Hi and :welcome:

Yes, you'll need to use flexi adhesive for both the insulation boards AND the tiles themselves

 

[alarmeng]

Cheers fella thats what i thought as i origionally bought none flex.

Looks like ill be back to the shop then.

Thanks again.

Dont suppose you could recommend a decent one to use.

Gaz

 

[jimbob]

Mapei Keraflex Maxi would be my choice - available from Tile Giant stores. Its a long pot life, slow setting one though so you'll not be able to walk on the floor for about 24 hours.

Make sure you use a flexi grout too - Mapei Ultracolour plus or something similar.