B
bjkirkham
Hi,
I'm just about to start my third tiling job at home, but want to get some advice before I start.
I'm laying 600mm x 600mm porcelain tiles on a ply sub floor and have read I should use a cement based flexi adhesive, Looked in wickes Flexible Rapid Setting Tile Adhesive - Tile Adhesives - Tiles Adhesive & Grout -Tiles & Floors - Wickes and B&Q Buildfix Stone & Porcelain Rapid Set Tile Adhesive White 20kg, 8022452048098 would these be suitable or should I be spending more?
Also I have a plasplug 100mm Compact wet cutter, again sufficient? Previously I have only tiled with max 300mm2 and smaller so this has been fine and a dry cutter so wasn't sure if it would handle the bigger tiles even with a new porcelain diamond blade
The area is just over 8m2, its a dog legged hall and I'm using a diagonal pattern.
Thanks - Barry
I'm just about to start my third tiling job at home, but want to get some advice before I start.
I'm laying 600mm x 600mm porcelain tiles on a ply sub floor and have read I should use a cement based flexi adhesive, Looked in wickes Flexible Rapid Setting Tile Adhesive - Tile Adhesives - Tiles Adhesive & Grout -Tiles & Floors - Wickes and B&Q Buildfix Stone & Porcelain Rapid Set Tile Adhesive White 20kg, 8022452048098 would these be suitable or should I be spending more?
Also I have a plasplug 100mm Compact wet cutter, again sufficient? Previously I have only tiled with max 300mm2 and smaller so this has been fine and a dry cutter so wasn't sure if it would handle the bigger tiles even with a new porcelain diamond blade
The area is just over 8m2, its a dog legged hall and I'm using a diagonal pattern.
Thanks - Barry
Last edited by a moderator: