Search the forum,

Discuss Laying brick slips as flooring in the Canada Tile Advice area at TilersForums.com.

Kyle Knowles

TF
Esteemed
Arms
1,050
1,108
Widnes
0_IMG-20181120-WA0007.jpg I did this these were 10ish mm porcelain u can use these on the floor
 

Reply to Laying brick slips as flooring in the Canada Tile Advice area at TilersForums.com

Make sure to mark a post as a solution for better transparency.

There are similar tiling threads here

    • Like
  • Question
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for tiling.I have removed the floor boards and plan to lay 18mm WBP plywood.The question is, what...
Replies
1
Views
616
    • Like
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0 There was some heated argument in the above thread! I don't have much...
Replies
1
Views
259
  • Question
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe had worn away over the past 70 years, causing a small crack in the copper. A plumber/builder fixed...
Replies
1
Views
791
  • Question
Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is 4.5m x 1.8m. The top third of the room is totally level. The remainder of the room has a slope...
Replies
3
Views
1K
  • Question
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in preparation for tiling. A couple of days after there's a lot of very fine cracks which have appeared, you...
Replies
5
Views
785
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Top