Discuss Levelling clips how many? in the Canada Tile Advice area at TilersForums.com.

W

WetSaw

Tommy is having a 3mm joint so why should he buy 1.5 or 2mm clips? Why not a 3mm clip?

Personally, I use 2mm clips on everything and space out with normal spacers if I require a 3mm joint. This just saves
me on buying different sized clips for different grout sizes
.

Haven't you just answered your own question? ;)
 
L

LM

Tommy you say you’ve never laid a tile of this size, with that in mind I must stress to you the importance of good prep and and having a flat floor, also you need to make sure you back butter the tile (with a 4mm if needs be) to get full coverage. All trowelling on floor and tile must be in the shortest direction so the air escapes and let’s the notches collapse. Don’t mean to tell a granny how to suck eggs but I hope you get where I’m coming from :)
 
T

Tommythetiler80

Tommy you say you’ve never laid a tile of this size, with that in mind I must stress to you the importance of good prep and and having a flat floor, also you need to make sure you back butter the tile (with a 4mm if needs be) to get full coverage. All trowelling on floor and tile must be in the shortest direction so the air escapes and let’s the notches collapse. Don’t mean to tell a granny how to suck eggs but I hope you get where I’m coming from :)
Thanks for your kind words Lee. I back butter like my life depends on it , I think I drive my boss mad with all the addy I use on certain jobs ;). Are you calling me a granny :D
 

Filip

TF
43
498
Midlands
Only a DIYer here but I am almost finished my daughters kitchen with 600x300 and I used Tile Lash and I think they are 1mm and I am using 3mm spacers but what I am finding is (because I am messy) its very easy to get addy around the clip part which makes it hard to get anything less than a 3mm gap. After removing some I can see that it is much better to use thin ones with extra spacers to reduce the risk of chipping. I use a fish finger size block of plastic to push the wedge in with two thumbs behind it. I also find the bottom of the lash ones very springy and a bit too stiff, I wouldn't fancy using these on a wall with thinner tiles.
I underestimated how many I would need and just brought a box of 150 for a 10m 2 room and had to buy another 60. I will be nicking her wedges and just buying some extra clips for my own use.
 
Last edited:

Andy Tiler

TF
Arms
45
1,043
manchester
I use clips for everything
IMG_20180214_143411.jpg
 

Reply to Levelling clips how many? in the Canada Tile Advice area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hey everyone, I've been at a stall in my bathroom reno most of this year mainly due to work...
Replies
1
Views
2K
Hi all I’m so glad to have stumbled upon this forum, which seems to be a treasure trove of...
Replies
5
Views
3K
gamer1
G
This kitchen is not level as can be seen in the attached picture. From floorboard to kitchen...
Replies
4
Views
2K
Sid2323
S
Thanks for the help on the other posts. I am expecting this to go sideways as the builder has...
Replies
0
Views
705
D
Replies
7
Views
24K
Deleted member 57709
D

Advertisement

Thread Information

Title
Levelling clips how many?
Prefix
N/A
Forum
Canada Tile Advice
Start date
Last reply date
Replies
20

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.6%
  • Kerakoll

    Votes: 17 10.5%
  • Ardex

    Votes: 11 6.8%
  • Mapei

    Votes: 45 27.8%
  • Ultra Tile

    Votes: 21 13.0%
  • BAL

    Votes: 38 23.5%
  • Wedi

    Votes: 4 2.5%
  • Benfer

    Votes: 3 1.9%
  • Tilemaster

    Votes: 22 13.6%
  • Weber

    Votes: 19 11.7%
  • Other (any other brand not listed)

    Votes: 17 10.5%
  • Nicobond

    Votes: 8 4.9%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 3.1%
Top