Levelling System

[macten]

No, always suggest a dark grey.
Reason being, when have u ever seen brown joints in a timber floor?
Every timber floor I've seen has dirt between the joints after a while. So I try to mimick that with the grey

I've always used a dark grey too but on my last job (porc wood planks in a hallway) I used Mapei's UC Mud (136) and it really suits it.
Mixes up looking like mapeis chocolate but dries a dark grey with a slight hint of brown (like dirt!) - this colour will be my first choice now if I'm asked what grout I would recommend for these tiles.

 

[Old Mod]

I've always used a dark grey too but on my last job (porc wood planks in a hallway) I used Mapei's UC Mud (136) and it really suits it.
Mixes up looking like mapeis chocolate but dries a dark grey with a slight hint of brown (like dirt!) - this colour will be my first choice now if I'm asked what grout I would recommend for these tiles.

Cheers Nick, I'll have to have a go at that!

 

[AliGage]

I've been on a site where nor only the builder instructed another tiler to use 1mm joints in planks over UFH. But it was grouted in Mapei Maron and looked awful!
I use grey 99% of the time too but have a look @marten as I have a 13sqm plank floor to do in a conservatory coming up soon.

 

[J Sid]

Ardex grout 16 Organic Earth looks good on some of these planks

 

[Old Mod]

Ardex grout 16 Organic Earth looks good on some of these planks

Yeah there's a few planks I wouldn't mind grouting up! Hehe

 

[LM]

massive difference m8 on large format tiles I use themall the time


started to use the genesis system 2yrs ago, I found a factory in china that makes them and imported 200 bags of then clips at a cost o f £2.00 PER BAG we now use them on all most every job we use large format tiles on but like he says you have to have a wet mix. there not for the amature as they don't know how the addy reacts under the tile i still check that the tiles are giving the right coverage by lifting one or two near the end of a mix just in case. pease of mindlast year me and our kid did 80 mtrs using this method in a beauty salon in darlo in 2days must thank phil at ctd for the recommendation as the guy had been droped in it at the last minute due to an over lap of jobs

Hi Ray, any chance you could pass on the link for the supplier in China please. I use the same system and wouldn't be without them on those kind of jobs, brilliant once you know what your doing with them. How many are there in a bag?