Looking for a new Laser level

[Spare Tool]

Looking for recommendations on a new mid price laser, not taking on many bathrooms any more if I can help it so don't need to spend £4/500 on 10 X 360 line jobbies, but there's always going to be the odd one I get forced into.. So looking at around £150 ish mark give or take, had a DeWalt DW 088k red and found the line a bit thick so they're out, but come across the Makitas SK103/4, Bosch GCL2, DeWalt DW 088 green beam, any on here use any of the above and can recommend, looking for a nice thin line and of course accuracy, or throw any other suggestions in the mix please?

 

[hmtiling]

The dw089k red is very good for the money mate

 

[Spare Tool]

You got one then H ...is the line quite thin? That's what I didn't like about the 088

 

[hmtiling]

You got one then H ...is the line quite thin? That's what I didn't like about the 088

Used to have one mate. The line is not that thin but I really liked it

 

[Steve6690]

I have the dw088 green and if you're after a thin line I would not recommend it.

 

[Andy Allen]

I have a yellow spirit level, and a pencil that produces a nice thin line....

 

[Spare Tool]

I have a yellow spirit level, and a pencil that produces a nice thin line....

Next level you get that extends from 15cm to 20m and bends round corners let me know Andy and I'll have it off you
[automerge]1567167667[/automerge]

Used to have one mate. The line is not that thin but I really liked it

Had a look, look decent but trust you to top out my budget H haha

 

[Italy]

I've seen them all and the most subtle is the bosch.
I believe that with £ 150, you can't have many things

 

[Blunt Tool]

Pardon our interruption...

Very good laser for the odd bathroom Andy and nice thin line

 

[On one]

Watching this thread with interest......I dropped my basic, but useful Stanley laser a few weeks ago
Trying to find a pole mounted laser level proving to problematic as most seem to be magnetic.

 

[Spare Tool]

Watching this thread with interest......I dropped my basic, but useful Stanley laser a few weeks ago
Trying to find a pole mounted laser level proving to problematic as most seem to be magnetic.

Hmmm got the Stanley pole myself, wonder if it would be possible to attach a piece of steel to the existing pole clamp and use with the magnetic mounts..

 

[hmtiling]

I spent over £100 on the dewalt pole a couple of years ago and have used it less than 5 times. A hand saw works just fine

 

[On one]

I spent over £100 on the dewalt pole a couple of years ago and have used it less than 5 times. A hand saw works just fine

Do's that mean you would be willing to let it 'go' at a much reduced price

 

[Old Mod]

Do's that mean you would be willing to let it 'go' at a much reduced price

You obviously don’t know Harry very well! Haha

Trying to find a pole mounted laser level proving to problematic as most seem to be magnetic.

I thought most lasers had a tripod mount, even if it has magnets?
Even my green Dewalt has a screw mount, in fact two, different thread sizes.
And before you say they’re to big or too wide to sit in the Stanley mount, I got a clamp with a tripod mount thread that grabs the pole instead. I’ve had my Stanley pole for over 10 years now and still fit any laser to it.

 

[GoneGuy]

Imex lasers could be worth having a look at