MixM8

[Stef]

Got this in last week & tried it out today.


Used in my 18v makita drill & I must admit it worked very good & mixed my Weber spf quickly & to a very good consistency.
Will update over the next few weeks as I use it more.
Thanks to Gary (the apprentice) for arranging this for me..

 

[Chalker]

What's it like to clean. .?
bet you don't do cleaning! Don't have a dog and bark yourself!

 

[Mr Tiler]

how much was that stef? will there be anywhere by me stocking this type of thing useable in a standard 18v?

- - - Updated - - -

if it is a standard 18v you used it on that is

 

[Stef]

What's it like to clean. .?
bet you don't do cleaning! Don't have a dog and bark yourself!

I cleaned myself when trying to clean it in a green star bucket full of water, it shot water almost 6 feet in the air, I will use a big Bal mixing bucket the next time.
I was very surprised how easy it mixed up the adhesive & how quick it mixed..

 

[Stef]

how much was that stef? will there be anywhere by me stocking this type of thing useable in a standard 18v?

- - - Updated - - -

if it is a standard 18v you used it on that is

Got it as a freebie & told them I would leave feedback when I use it.
As I said I only done the one mix today so need to do a few more to give an honest assessment of it.

 

[Chalker]

Looked on the site . It's £30for 10mm hex and £35 for 14mm.

keep us informed how it lasts please.

 

[White Room]

I'll stick with my Eibenstocks and paddles.....

 

[charlie1]

I'm constantly trying to minimise hoarding specific tooling. I can see this as being a good tool for a small bathroom if it saves me getting the mixer out, I think anything bigger then my 18v dewalt would be swearing at me! Nice find Stef!

 

[Stef]

Looked on the site . It's £30for 10mm hex and £35 for 14mm.

keep us informed how it lasts please.

Will do, I was on the website before it got sent to me & I thought it was expensive but on 1st impressions I would spend that on it.
Mixed up very quick..

 

[Andy Tiler]

I tried one of them steff. I didn't like it,couldn't mix lightweight adhesive!!
just spun around in the bucket doing nowt. Sent it rite bak!!
better off with the old metal paddle.

 

[Stef]

I tried one of them steff. I didn't like it,couldn't mix lightweight adhesive!!
just spun around in the bucket doing nowt. Sent it rite bak!!
better off with the old metal paddle. í*½í¸Š

You need to make sure the ends are both splayed out from one another,
It spun round in the bucket with me but as soon as the arms spun out from one another it worked a treat.
Still can't believe how quick it spun up a mix..

 

[Andy Tiler]

The ends were out it didn't drag the adhesive around!
anyway I'm not investing and I'm out...

 

[Andy Allen]

How much..:yikes: I'll stick to my £5 metal paddle..

I thought you were Scottish stef....surprise your not using a bent over coat hanger..lol

 

[Mr Tiler]

How much..:yikes: I'll stick to my £5 metal paddle..

I thought you were Scottish stef....surprise your not using a bent over coat hanger..lol

haha anyone recommend a decent mixer for a decent price?

 

[White Room]

haha anyone recommend a decent mixer for a decent price?

How much you thinking of paying Ash....