montolit discs

[DHTiling]

check your machine is running true...

 

[kibos]

The machine had dewalt blade which cut better. The machine is a month old and has been working well. Is there a way of checking the trueness of the machine that you can recommend.

 

[ishi69]

Put a square against the fence on the table and then check that the front and back edge of the blade are running true to the square. Also the montolit disc is used chipped initially then seemed to bed in and was fine after cutting a few old porcelain tiles.

 

[Burslems finest]

I'll put a vote in for the norton super gres xt. Best i've used bar none. My current one has been in for 18 months and is still cutting now the same as the first day i used it!

 

[White Room]

I'll put a vote in for the norton super gres xt. Best i've used bar none. My current one has been in for 18 months and is still cutting now the same as the first day i used it!

What do you cut with that blade, porcelain etc.

 

[John Benton]

I used the DNA for the first time on my own bathroom and I've thrown the Viagra away it's that good

 

[Dan]

I've created a bit of an index for the Montolit DNA Blades. Check it out if you'd like to see loads of threads and posts about the DNA Blades.