Mosaics on floor.. flatness!

[william hughes]

You don't really need to apply much pressure when smoothing mate. As long as your addy was combed out properly with notch. Any spots of build up in addy can put you off. But as local tiler said remedy with straight edge and addy.

cheers mate, level off with addy, let it go off a bit? then more addy notch and lay?
appreciate the advice people

 

[MTiler]

be careful sealing mosaics prior to installing, any sealant that runs onto the mesh will soften the body of the mesh. It can also weaken the glue attaching the mesh to the mosiacs.