my cutters died..

[Andy Allen]

my plas plug master tiler died today after months of patching it up I decided to get a new one...

this little cutter is what I call my every day cutter, just right for small bathrooms or kitchen, it didn't spray water every where so was safe to use indoors, so I need a replacement, that's dose the same... looking at ...another plas plug, a vitrex or a biriconella....probs spelt wrong but you know what I mean.....any other suggestions..? or which would you recommend....cheers.

 

[Stef]

my plas plug master tiler died today after months of patching it up I decided to get a new one...

this little cutter is what I call my every day cutter, just right for small bathrooms or kitchen, it didn't spray water every where so was safe to use indoors, so I need a replacement, that's dose the same... looking at ...another plas plug, a vitrex or a biriconella....probs spelt wrong but you know what I mean.....any other suggestions..? or which would you recommend....cheers.

I would highly recommend the Bricollina.
It is a nice little compact tile cutter probably just over half the size of the plas plugs.
I think it depends on what you are going to be cutting, I have cut all sorts but I wouldn't use it to cut heavy porcs all day.

 

[White Room]

The Briccolina is as cracking cutter for the smaller bathroom for ceramics but porcelain a better blade would be needed.

 

[Andy Allen]

just be for the cheapy ceramics or 300x300 porcs I got my nd200 for large format ect.....will check out the briccolina.....are upgrade blades easy to come by....its not some weird diameter, or centre hole that's a nightmare to get hold of..

 

[Stef]

just be for the cheapy ceramics or 300x300 porcs I got my nd200 for large format ect.....will check out the briccolina.....are upgrade blades easy to come by....its not some weird diameter, or centre hole that's a nightmare to get hold of..

It is Andy but you can get hold of blades no problem, Trade Tiler stick them.

 

[Time's Ran Out]

You want a Dewalt like the rest of us!

 

[White Room]

I found Tradetiler supplies a couple of blade sizes for Briccolina but you would have to grind the nib off where the blade fits.