need advice

[Saltire69]

Bal Grip is good for tiling on tile.

 

[iain1979]

saltire69 where you from??????

 

[davy_G]

Where the tiles porcelain or ceramic? Decent adhesive should have dried into the biscuit of a ceramic tile as the moisture could not dry into the glazed tile substraight. If the tiles you put on where porcelain then the adhesive had only the relatively small grout lines to dry out.
It does sound like crappy adhesive though. Pity the job turned out bad but fix it well and on and up!

 

[Perry]

it can take 7 days for tub adhesive to dry, if its above 4 mm deep can take longer may be the prob
----
use cement based bucket should be baned

 

[sjw450]

they were ceramic tiles from bnq and they were about 300 by 200, i did it in brickwork ive got pictures of the finished job but dnt no how to upload them to this, i used my 6mm trowel and made the adhesive perfect for the tiles it just didnt harden cheap crap was the problem and im doin a bathroom tomorow onto tiles too and i only have 1 and a half tubs of my own blue star coz this guy says hes already bought the materials and guess wot, there from bnq!!!!! nightmare, im only tiling 1 metre high i think its m square metres so i hope i can do most of it with my own stuu then i can get more for the other toilet on sat!

 

[sjw450]

correction: 5 square metres not m square metres

 

[DHTiling]

Don't be shy ust tell the customer what he has bought might be ok for DIY type work but not for you to use and give a guarantee on it..Stick to your guns and refuse to use it......good luck...

 

[sjw450]

will do! thats wot its all about confidence!