need eyes in the back of your head.
Using Norcros NX standard set floor tile adhesive. After an issue with multipro boards I did some trials with this product. Following tec instructions on the bag, to the letter, after. 4 day cure my tiles pulled off with minimal finger pressure.
On primed ext mahogany ply and birch ply that was primed @ 4.1 with SBR,which is recommended on the bag, complete failure.
On contacting their tech support they claim I should have been priming with neat SBR 😡
Would have been nice to put that advice on the bag instead of mis-advice !
So currently trialing a few tiles with neat SBR. I'm not looking forward to the pull test.
Rapid set sticks to EVERYTHING but I the pot life is 30 mins
Using Norcros NX standard set floor tile adhesive. After an issue with multipro boards I did some trials with this product. Following tec instructions on the bag, to the letter, after. 4 day cure my tiles pulled off with minimal finger pressure.
On primed ext mahogany ply and birch ply that was primed @ 4.1 with SBR,which is recommended on the bag, complete failure.
On contacting their tech support they claim I should have been priming with neat SBR 😡
Would have been nice to put that advice on the bag instead of mis-advice !
So currently trialing a few tiles with neat SBR. I'm not looking forward to the pull test.
Rapid set sticks to EVERYTHING but I the pot life is 30 mins
