ooo the "tiling specialist" is going to call me

[charlie1]

I had one of these tiling specialists call me up, he was from tech dept from undrfloor heating company, anyway he was just calling to advise me that you can actually tile straight on top of the heating mat and "no need" for that slc thingy! ...Muppet!

 

[tfs]

These tiles here were £25 sqm tiles. The **** in the shop asked 'are you sure your tool is square?'

I should have hit him over the head with my square, this is a metal engineering square.

Unfortunatly wanabe experts on £5.90 per hour like to thiink they know better than the pro's. Makes them feel better about themselves when they try to come up with bullshhhhh solutions and answers

 

[tfs]

these were 30x60 porcs

 

[Rizzle from the Portizzle]

what happens is its cheaper to make 600x600 porcs then cut them down the end up 600x298 no laser cutting if you turn them over and look at the back you will see that the press mark on the back is uneven when cut some do this well some dont

 

[charlie1]

what happens is its cheaper to make 600x600 porcs then cut them down the end up 600x298 no laser cutting if you turn them over and look at the back you will see that the press mark on the back is uneven when cut some do this well some dont

Ye ray, I have also noticed this with fancy border tiles!