plasplugs tile spacers

[ryanbrown]

Anyone know if plasplugs tile spacers are any good?
says trade grade on the tub.

 

[DHTiling]

never used them ....dave....

• For consistent and even spacing of tiles and perfect tile alignment.
• Allows for a 2mm grout line.
• Can be grouted over and sealed under the grout for a flawless finish.
• Easy to use.
• Plasplugs…makes it easy.

 

[GazTech]

one spacer is very much the same as another..unless they are rubi...........Rubi wedges for tiling. 5mm (3/16"). Quantity of 500. Ideal for use with wall tiles. Rubi tile wedges allow for excellent finishing with total precision due to the homogenity of their measurements and the absence of rough edges and small defects.

 

[Yorkie]

one spacer is very much the same as another..unless they are rubi...........Rubi wedges for tiling. 5mm (3/16"). Quantity of 500. Ideal for use with wall tiles. Rubi tile wedges allow for excellent finishing with total precision due to the homogenity of their measurements and the absence of rough edges and small defects.http://www.tilersforums.com/attachm...um/686d1191487382-tile-skirting-5mm-wedge.jpg

Also usefull when fitting tile around uneven surfaces.

 

[DHTiling]

i would'nt be with out my rubi wedges....dave..

 

[MTS]

I've never used the rubi wedges... what do you mean that they are useful around uneven surfaces.. How???

 

[ryanbrown]

Trying to find someone localish that sells ruby wedges too. Got to be a better option then wasting time tearing up bits of cardboard.

 

[GazTech]

Trying to find someone localish that sells ruby wedges too. Got to be a better option then wasting time tearing up bits of cardboard.

Topps will order them for you Ryan....Gaz

 

[Yorkie]

I've never used the rubi wedges... what do you mean that they are useful around uneven surfaces.. How???

These will save you lots of time and therefore money. Used for wall tiling in situations when you are putting bottom cuts in above any uneven surface like rough concrete etc. Using bits of card board and tile nibblings is OK But takes ages. if nothing is used the tiles keep slipping, especially when they have a thick layer of adhesive on them. The trick is to use a wedge instead but obviously you can only insert it the thickness of a tile. Turning it to the side over comes this problem. Micro adjust the height up to 5 mm. Use on top of each other to go over 5 mm. Great for marble wall tiling where each piece varies slightly and standard spacers will not work ... Have a look on trade tiler to see example
Text Courtesy of D.Neaves

 

[guy1976]

ctd sell rubi wedges

 

[BuyBrandTools]

So do we!

Rubi Tile Wedges & Spacers

 

[ryanbrown]

with the rubi wedges i reckon you could cut a bit off at the 2mm mark with scissors - have them in a separate container and then you could use then straight on for larger gaps.

 

[GazTech]

with the rubi wedges i reckon you could cut a bit off at the 2mm mark with scissors - have them in a separate container and then you could use then straight on for larger gaps.

yep...just bite the end of..lol.....Gaz