Porcelain grinder blades

[Fitwidge]

I’ve just bought a cheap blade of ebay (£5) haha!

It’s actually not bad! (Chips tile abit at times)

But I’m wanting a decent blade, was thinking montolit cgx, anybody had experience?
What the cuts like?

Also need a drilling kit for my grinder?

Cheers in advance!

 

[The Tiler]

ats do a very good range and a good price

 

[The Tiler]

ats

 

[The Tiler]

Cutting Archives - ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product-category/cutting/

 

[Waluigi]

Have a chat with ATS about their Porcelain blade.

This one:- (red)

Works well on Porc. I do have a Monty CGX too. Very similar quality of finish

 

[The Tiler]

not tried the red one
I normally use Turbo X Diamond Porcelain Blade - ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/turbo-x-diamond-porcelain-blade/
and get very good results

 

[Waluigi]

Just checked the website and it’s not listed. ATS sent me the blade to test. I’ve only just had a chance to test it last weekend. Yes it’s a good blade on porcelain.

 

[Fitwidge]

Oh, how do you guys deal with the dusty grinders?

Was messing about with my grinder yday and the room turned into a cloud -.-

 

[The Tiler]

have to cut outside, so lots of up and down the stairs. Will keep you fit though

 

[Waluigi]

 

[Perry]

I have always used a damp sponge.

 

[WetSaw]

The fan is so powerful you have to hold it down with your wallet...

 

[Waluigi]

Insert joke here about Plumbers.....

Paging @timeless john and @callatiler

 

[peteablard]

Have a chat with ATS about their Porcelain blade.

This one:- (red)

Works well on Porc. I do have a Monty CGX too. Very similar quality of finish

View attachment 102029

The red one is superb, I've tried the 115mm in my grinder and also the 160mm in my wet saw (Flex CS60) I've not had chance to try the black ones yet but hope to next week. They are being tested against the ATS 180mm continuous rim blade that I ordered with the saw on 20mm porcelain. Watch this space!

 

[Concrete guy]

Thanks for the feedback on these so far people.

Yes they are test blades. We like to get real world test where possible and in this case we are interested in the red vs black. So I'm interested how you find the black blade Pete. Feedback so far has suggested it's even better than the red one.