Hi all, some advice please. I am laying ditra matting on a very large concrete kitchen floor. Why? The builders had a go at self levelling the floor twice and made a right hash of it both times. Builders have now disappeared leaving the customer in a mess. The SLC is flaking in parts and the floor is still slightly uneven where they just threw the stuff down. I spoke to Mapei and have ascertained that there is a DPC and the floor isn't damp. Customer doesn't want another layer of SLC, so I thought I would take up any excess flaking material, use a SLC on a couple of parts where the level is a little low and then lay Ditra. My question is what is the best way of fixing the ditra. Should I use my normal ady, or should I use a thin set to fix it to the floor with. Can anyone forsee any other problems I may run into.
Thanks
Steve
Thanks
Steve