Price check!!!!!!!!!!!

[alberttrotter1]

Afternoon forum,

Little job to price - I have a figure in my head, but would like the forum to pass judgement and see if i'm close - I am looking at putting a price around the £600 mark.

21m2 Porcelain 12x12 brick set full tile with a border all round.

The border must run along the bottom of the window sill, so am i right in thinking that with the top and bottom cuts, they will get what they get, also they have put in a stud partition at the end of the bath (linen cupboard) and the edge of this is being tiled as well, now will the tiles stick to the hard wood support and if not, what can i do to do it. My plan is to use Nicobond flex adhesive/grout and find something else for tiling to the stud wall (12mm ply).
As always - Advice gratefully accepted.
Thanks folks.:mad2:

 

[tysfoot]

No idea but i would like to know the answer also :8:

 

[grumpygrouter]

Yep, you have got to have a full tile running off either side of the border. Cuts will be as they come, unless they are impossible and then you may need to convince the customer to revise the border position.

Not sure what you mean about the hard wood but as a stab, can you overlay with backerboard first?

Grumpy