Pro Flexible

[DHTiling]

MAPEKER RAPID SET FLEX


Technical Data Sheet
English


Rapid Setting Flexible Adhesive
• Ceramic & procelain tiles
• Use with underfloor heating encapsulated
in a levelling compound
• Use with plywood overboard (min 15mm)
• Ready to grout in 3 hours

 

[tfs]

Picked up a bag this week courtesy of Mapei at a product demonstration evening at my local TG. It is mapeker rebranded as confirmed by the rep. Can't be used with latex plus and not suitable for UFH. Used it yesterday and will be using again.

You are partialy correct matey,

It is fine for cable heating once slc over but, it is not reccomended by Mapei for hot water piped underfloor heating.

It is also not suitable for installing agglomerate stone.

 

[DHTiling]

it is not reccomended by Mapei for hot water piped underfloor heating.

Can i ask where it states this please..?

Mapeker flex is a C2f.. so IMO totally suitable for heated screeds.

 

[tfs]

I dont know if it is stated in the bag Dave but, I have read it in Literature previously. I have a copy on my email somewhere.

 

[DHTiling]

It might be on the older Mapeker literature but new Mapeker is now a c2f flexi.. but any info you have would be great..

 

[DHTiling]

Can i just say... my advice goes for the Mapei Mapeker flex and NOT pro flexible from TG.. It is just a comparison of what pro flexible is ..adhesive wise but not actually one in the same adhesive.. pro flexible doesn't do all that Mapeker flex will..

Thanks to tfs for the info on pro flexible..

 

[Aspect Tiling]

Just going by what I was told. Not got the bag anymore so can't confirm but sounds like tfs has cleared up the issue